Hovering Vengeance

The second Ravenwing vehicle was painted with the same technique as the first one, however, I did learn a few things from the Nephalim. First, I was much more aggressive with the blue edging highlights. This is really what makes the model pop, and the best effect is achieved when all edges have an even blue tone. The bone highlight is what is used to bring up certain corners and give the model dynamism.

Otherwise, this was a very quick and enjoyable paint job.  The cockpit instrumentation turned out really well and adds great detail to an otherwise fairly mono-chromatic model. And thanks to my experience with decals on the Devastators, I added the skull decal on the gunner without problems. Again, I had to score the decal to allow it to wrap around the shoulder pad.

Next up, Dark Angels go camping.  Or rather scouting..

You're a Devastator Now, Brother

This set of Devastators was painted with the usual dip method. The one new technique I tried was using decals for the Dark Angel shoulder pad insignia. As much as I enjoy playing around with the occasional free-hand design, I know that there is no way that I could do an acceptable job with the highly symmetrical and structured Angel Winged Sword. I am quite pleased with the final result!  The one tip I picked up is that in order for the decal to adhere to the highly curved shoulder pad, it needs to be scored. Diagonal cuts create flaps, which allow the decal to wrap on itself, allowing it to become convex. The end result really does look painted on and I will certainly be using decals in the future.

Next up, we look to the skies..

The Razorback: Sword of Wrath

The Rarorback, which also doubles as a Rhino, is ready to go.  My Dark Angels will finally not have to trudge across the battlefield on foot, but instead will be able to get around in style, inside Sword of Wrath's armoured hull.

The model was undecorated with Army Painter's excellent Angel Green undercoat, then painted with classic techniques including dry-brushing and blending. I also tried the new GW dark brown wash for the first time and was quite pleased with the results. It worked very well on the bone coloured scroll, the driver's face and the white angel ornament. For the text, the micron pen proved invaluable. If you like to do scroll work or writing, a 0.5mm pen is a must.

Up next, the 3rd company gets some needed air support!

Dancing with Skargog Skull 'ead

My Savage Ork Shaman is ready

As with all characters, I painted Skargog Skull 'ead with classic blend shading instead of dipping.  I really enjoyed shading and blending the muscles and and cloth. The Savage Ork minis are quickly becoming some of my favourites to paint because they offer a great mix of large area shading and detail work. And of course, this sculpt has one of the most dynamic poses in the line.  How often do you get to see a half-naked ork dancing?

I used the Micron pen on the skulls and I am thrilled with the results. It's hard to see in the pictures, but I was able to draw in some really great designs which bring the mini to life and add eye-catching detail.

Now that Skargog is ready, complete with the Shrunken Head hanging off his belt, he'll be joining my Savage Ork Mob and providing them some much needed protection!

The Other Death Wing

The second squad of the Death Wing terminators has been completed. With this squad, I am finished all units of the starter box and now only have the Commander and Chaplain left before I can officially declare the starter box painted.

This second squad showed me the limitations and perils of the Army Dip. The dip became extra thick and it was very difficult to remove the excess. As a result, the whole squad came out looking a little muddy and I had to spend time re-painting and cleaning up the extra dark coat to bring back some of the original colour. Especially on the open sloping areas like the shoulders and back there was a distinct streaking effect. The final result is still very much solid table-quality, however, I am not happy with how the minis turned out.

I have thinned the dip with distilled turpentine for the next time. Hopefully it will work better.

What's next for the Dark Angels? I will get a couple of more games in and at this point the main problem I have is getting my Tactical Squads into the action. I think a Rhino or two are in order.

Heavy Footsteps

The army needed some heavy hitting so I decided to add a 40k classic: the Dreadnought. It's an iconic Space Marine vehicle and I chose to overlook their general fragility in this edition.

This is the first model that I magnetized and I am very happy with the results.  I have now 4 options for my heavy walker, but I think that these two will be most common. The cheaper basic:

 
and the decked out heavy hitter:

I was a little apprehensive about using the Army Painter dip on a model this size, but the final results are not bad at all. The dip had the nice effect of giving the model a weathered look, which is great for vehicles. I spent a bit more time detailing and shading to bring out some highlights than I do on individual troopers and I'm quite happy with the result. Oh, and I used a Decal Softener from Flames of War. It really helped to blend the transfers into the armour. For a model this sized, I did not feel comfortable going freehand to paint the symbols and numbers.

I can't wait to see how this guy does in battle!  Brother Serean has returned...

On the Wings of Ravens

The dual Ravenwing squad is done and done.

I have to admit that I was wary of using the dip on a black armoured model, but the squad turned out rather well.

The one new technique I tried this time around is how to highlight black armour.  I typically either went with dark gray to light gray dry-brush, or sometimes dark blue to white dry-brush, which works, but I the results were not satisfying. This time around, however, I tried medium blue and then bone to bring out the details. It worked better!  The blue gives the models some colour and the bone highlights are softer than white. When combined with the wash, the black armour has some great depth, pigment and details. And the best part is that I was able to use gray on the tires, which made them stand out from the bikes. I will definitely use this in the future.

The army is coming together nicely.  I can see the end of  the Dark Vengeance double box.  

Next up, I need a hero.

This Paint Job is Terminated...

Finally finished up my first batch of Deathwing Terminators.  Br. Tremiel is ready to teleport into battle!

The dip worked very well with the bone base, which I expected and it also layered some nice depth on the white banner and parchment.
The banner gave me a chance to try simple free-handing of the Deathwing emblem, which came out rather well.  I originally wanted to add some text, but ended up running out of space.

Two main lessons from this batch.

First, never ever use old primer.  I do not know why I ignored this wisdom.  The models ended up with a terrible, sandy texture which really obscured some finer detail on the robes and swords of the autogunner.  Fortunately I was able to cover the damage and it's not visible on the finished models.  But I was worried for a bit there.

Second, the P3 wet-palette is excellent for wet-blending. I only blended the power-sword, but this technique will be very useful on the character models.

Next up, my strike force gets some speed with a 6 bike Ravenwing squad.

Brother Hesdiel's 2nd Tac, 3rd Co.

The second tactical squad of the 3rd Company is complete.

I used pretty much the same technique as with the first squad, with minor tweaks. This time around I spent more time highlighting each marine's power armour contours to bring out the shape. I then ended up going back to the 1st squad and adding those same highlights.  Without them, the dipped green was just too flat looking.

The big differences were with my painting equipment.  Two major improvements: new paint brush and the P3 Wet Palette.

I pained these guys mostly with a Winsor & Newton Minature Series 7 Nr. 3 brush. Yes, that brush does cost more than twice what a normal brush costs, however, so far I am very happy with the results. It provides a perfect balance between area coverage and clean lines. 

I also tried using the Privateer Press P3 Wet Palette for the first time and I am very impressed. I think it is essential for anyone paining larger groups of figures with the same colour, because it makes the paint last forever on the palette. Especially if you have to custom blend a shade, having it dry on the palette within 10 minutes is very frustrating. With the wet palette, you can keep on painting and painting.  One word of caution, it is very easy to get thin paints overly watery, so be careful when using thin colours. 

With my core Troops done, it's time to move on to Elites.  One squad of Deathwing is coming next.